The first thing to remind everyone is that the acceptance link of the roll forming machine is very important. If the acceptance is not strict and the unqualified equipment is pulled to its own factory, it will cause a lot of trouble in the later stage. Therefore, everyone must take the acceptance process seriously, and let the unqualified equipment be modified by the manufacturer before delivery, otherwise many problems will be difficult to solve after reaching their own factory. So, when we are accepting, which aspects should we mainly check?

1. Acceptance of the accuracy of the finished product.

This is the most important part. If the accuracy is not up to standard, it means that the machine is useless. If it involves modifying the rolling wheel, it will be more troublesome, and it will be very troublesome to handle after pulling it to your own factory. Accuracy includes cross-sectional dimensions, tolerances, straightness, etc.

2. Acceptance of product surface finish.

The appearance of the pulled product directly affects the appearance, especially for some products with strict surface requirements, the surface should not have random flowers, burrs and the like.

3. The product is cut off, and the acceptance of the burr at the punching part.

The appearance of the pulled product directly affects the appearance, especially for some products with strict surface requirements, the surface should not have random flowers, burrs and the like.

4. Automatic production acceptance of equipment (check whether continuous and uninterrupted production can be performed).

You should buy more raw materials for the test machine to the equipment production factory to check the continuous productivity of the equipment. Don't think that the product you pull out is qualified. If the equipment cannot be produced continuously, the equipment cannot be produced normally when it is pulled back, so it must be checked.

5. Acceptance of the material of the roll, punching die and cutter die.

Check whether the rolling wheel is processed according to the material specified in the contract, whether it is processed according to the contract process, whether the shaft diameter corresponds to the contract, whether the qualified steel plate material conforms to the contract, whether the equipment structure conforms to the agreement, etc. In particular, the material of the rolling wheel is related to the life of the equipment. When the equipment is running, the rolling wheel is in a state of high friction. If the material is not qualified, it is easy to wear. Whether the stamping die and the cutting die are qualified. Including material, punching, cutting off whether the burr is serious and so on.

6. Quality acceptance of electrical components (whether the acceptance is installed and used according to the brand specified in the contract).

For example, whether PLCs, inverters, electrical appliances, etc. are not in accordance with the contract, especially for some manufacturers that have special requirements to use a certain brand of electrical appliances, it is necessary to point out that some serious problems must be discovered in time and solved in the production plant in time . If the product accuracy problem, is the mold design unreasonable? Or is the height not complete? What is the reason for the surface finish of the product? The burr problem needs to be changed to the mold, and the equipment cannot be continuously produced. After arriving at the factory, it is difficult to solve because the supporting equipment is not complete. Therefore, it must be solved in the production factory.

In addition to the roll forming machine, we can also provide more targeted pre-sales advice and services for other Gutter Roll Forming Machines. We will sincerely create and share success with all clients.