The operation of the roll forming machine should strictly follow the operating procedures, so as to ensure the stable and normal operation of the forming machine, so as not to affect the production. During the operation, pay attention to the execution of the following problems.

1. The operator should undergo strict training, be familiar with the operation process of the molding machine, and be able to eliminate the failure in time. The operator should carefully, conscientiously and responsibly implement the various procedures for the operation of the molding machine.

2. When the roll forming machine is running, there should be no sundries on the machine table, so as to avoid the vibration and fall into the roll during the production process, causing damage to the equipment.

3. Before each startup of the molding machine, add lubricating oil to each refueling point that needs to be lubricated.

4. Before feeding into production, the machine should be turned on for idling to check whether the equipment is running normally, and then feed into production.

5. During production, it is forbidden for non-operators to approach the equipment, especially for the molding machine with fast production speed, it may cause harm to personal safety. During the production process, the operator is not allowed to get close to the rotating part. If it needs to be operated or repaired, it must be stopped and operated again.

6. During the production process, pay attention to the operation status of the equipment at any time, pay attention to whether there is any abnormal sound or vibration, find and deal with it in time.

7. the production of one or two minutes needs to add lubricating oil to each refueling point.

8. every half an hour of production, it is necessary to measure the workpiece produced by the roll forming machine to check whether the accuracy meets the standard.

9. The operator cannot leave the production post without authorization. If he needs to leave, he must stop the operation of the equipment first.

10. Before leaving get off work, you should turn off the power of the equipment, clean the equipment, and develop the habit of cleaning before starting the machine and cleaning before leaving work every day.

11. Strictly implement the special person to start the system, the responsibility is on the person, and the problem is easy to be held to the individual. Therefore, when handing over the shift, the procedure for handover should be strictly implemented. When handing over, the problems that occur should be recorded in time, and the handover record of equipment performance and operating status should be made.

We also supply all kinds of Rack Roll Forming Machine,W Beam Roll Forming Machine for you! We can assure our customers of our products with high quality, best services and a reasonable price.